Huizhou Jingrui Industrial Equipment Co., Ltd.

Shelves are racks specially used to store individual items. According to the structure, the shelves can be divided into: beam shelves, drive-in shelves (corridor shelves), cantilever shelves, light shelves, medium shelves, heavy shelves, pallet shelves, mezzanine shelves, drive-in shelves, tire-specific shelves Shelves, drawer shelves, etc. Shelves are further divided into low-level shelves according to height: height below meters; middle-level shelves: height between - meters; high-level shelves: height above meters. According to weight, they are divided into heavy-duty shelves: the load capacity of each shelf is more than kilograms; medium-sized shelves: the load capacity of each shelf (or shelf) - kilograms; light-duty shelves: the load capacity of each shelf is less than kilograms. Shelves can realize modern management of warehouses, improve warehouse functions, increase storage area, and protect goods from damage.
Heavy-duty pallet racks are made of high-quality cold-rolled steel plates and are rolled into shape. The columns can be up to 3 meters high without any joints in the middle. The beams are made of high-quality square steel, which has large load-bearing capacity and is not easily deformed. The hanging parts between the beams and the columns are cylindrical protrusions. Insertion, reliable connection, easy disassembly and assembly, and safety pins are used to prevent the cross beams from lifting when the forklift is working. The surface of all shelves has been treated by pickling, phosphating electrostatic spraying and other processes to prevent corrosion and rust, and has a beautiful appearance. Suitable for medium-sized shelves in large warehouses: medium-sized shelves have unique shapes, reasonable structures, easy assembly and disassembly, no screws, and are strong and strong. Gravity-type shelves: have large bearing capacity and are widely used in shopping malls, supermarkets, corporate warehouses and public institutions. Lightweight Shelves: Light punched shelves are a highly versatile structural system that can be widely used to assemble light racks, workbenches, tool carts, suspension systems, safety nets and support frames. The length of the punched angle steel can be quickly cut according to the scale, assembled, modified and reinstalled at will with screws, so that it can meet the needs of careful planning and emergency use. Mezzanine type shelves: fully assembled structure, can be used Wooden boards, checkered boards, steel plates, and other materials are used as floor slabs, which can be flexibly designed into two or more floors. It is suitable for the storage of small packages of hardware tools, electronic equipment, mechanical spare parts and other items. It can store a wide variety of goods and small batches of goods. Make use of space.
High-level shelves have the characteristics of good assembly, large load-bearing capacity and strong stability. The shelves are made of hot and cold steel plates. Corridor racks are designed to store large quantities of similar palletized goods. The pallets are stored on the support rails one by one in depth direction, which increases the storage density and improves space utilization. This kind of shelf is usually used in situations where storage space is expensive, such as refrigerated warehouses. Aisle-type shelves have basic components: frame, guide rail support, pallet guide rails and diagonal tie rods, etc. This kind of rack warehouse has high utilization rate and can realize first-in-first-out or first-in-last-out. Suitable for storing large quantities, small variety of goods, and batch operations. Provides maximum storage in the smallest amount of space available. It is suitable for storage operations of large quantities and small varieties of goods. The forklift can drive directly into the cargo lane to store and retrieve goods, making the operation extremely convenient.
Requirements for shelf machinery and equipment: Features of counter-balanced forklift or stacker shelves: Suitable for storage with low inventory flow. Optional options available for warehouses with low pickup rates. Ground usage rate: , high (needs to be calculated based on the above design). Beam-type shelves are the most popular and economical form of shelves. They are safe and convenient. They are suitable for various warehouses and provide direct access to goods. It is the simplest and most widely used shelf. Can make full use of space. The convenient pallet access method is adopted to effectively cooperate with forklift loading and unloading, greatly improving operating efficiency. Mechanical equipment requirements: counter-balanced forklift or stacker. The forklift can improve the utilization rate of floor space 3, and the operating height is up to 3 meters. Features of beam shelves: smooth inventory turnover. Provides 100% selection capability. Increase average pickup rates. Transom shelving provides premium product protection. Ground utilization rate:,
Mezzanine-type racks are suitable for situations where the site is limited, the variety is large, and the quantity is small. It can increase the utilization rate several times on the existing site, and can be operated with the use of a lift. Fully modular structure, special light steel floor slab, low cost and fast construction. It can be flexibly designed into two floors or multiple floors according to the actual site and needs, making full use of the space. Cantilever racks are suitable for storing long and irregular goods. The forward-extended cantilever has a lightweight structure and good load-carrying capacity, and can greatly improve warehouse utilization and work efficiency when storing irregular or special-length materials. After adding shelves, it is especially suitable for warehouses with small space and low height. It has convenient management and wide field of view. Compared with ordinary shelf-type shelves, the utilization rate is higher.
The functions and functions of shelves are as follows. The shelf is a rack-type structure that can make full use of warehouse space, improve storage capacity utilization, and expand warehouse storage capacity. The goods stored in the shelves do not squeeze each other, and the material loss is small. The function of the material itself can be fully guaranteed and the loss of goods can be reduced. The goods in the shelves are easy to access, count and measure, and can be first in, first out. To ensure the quality of stored goods, measures such as moisture-proof, dust-proof, anti-theft, and anti-vandalism can be taken to improve the quality of material storage.
Warehouse shelves have a large load-bearing capacity, and each layer of the warehouse shelf can carry a maximum load. It is fast and convenient to access. It is the most widely used pallet cargo storage system and has strong versatility. Its structure is that the shelves are divided into several rows along the width of the warehouse, leaving a passage in the middle for forklifts or other handling machinery to pass. Each row of shelves is divided into several columns along the length of the warehouse and several layers in the vertical direction, thus forming a large number of cargo spaces for pallets to store goods. Each pallet can be stored or moved independently. The warehouse shelves are made of high-quality cold-rolled steel plates, and the surface is treated with electrostatic spraying to make them anti-corrosion/anti-rust/sturdy and beautiful. Its various specifications and load-bearing design can meet the use requirements of factories, warehouses, assembly lines, and warehouse supermarkets. The shelves are assembled by plug-in connection, which is easy to install and disassemble and has a wide range of uses. The steel laminate and beams can be adjusted up and down to meet a variety of usage requirements.
The purchase process of the shelf system mainly includes the customer's requirements for the warehouse shelf system, provision of solution design, selection of the solution, discussion and optimization of the solution's rationality, evaluation of the degree of optimization, quotation contract signing, detailed technical design of the shelf system, manufacturing of the shelf system (material preparation, processing, Surface treatment, packaging, etc.) Shelf system installation and acceptance. Warm reminder: When choosing a shelf, you should look at the type, size, weight and quantity of your products. Products with a wide variety of light bulk goods should mostly use light angle steel frames, cartons, and boxes. Products placed in boxes should mostly choose medium-sized shelves or three-column shelves. , the length of this shelf can be from . meters to . meters, and a single layer can hold multiple boxes, turnover boxes, and storage utensils. There are more irregular products and large lightweight products placed on the mezzanine platform. Most of these products take up too much area. The mezzanine platform is originally an additional floor added to the original floor, which greatly saves storage space and improves storage space. Double-layer mezzanine shelves are mostly used for accessory storage and small item distribution warehouses, parts warehouses, and heavy-duty shelves are mostly used in the electronic product industry, paper industry, and various industries. When using shelves, pay attention to the load-bearing performance of the shelves and not overload them. For use, it is best to put the product on the shelf after determining its weight. It is not easy to display overweight products using display shelves. Supermarket shelves are mainly used to display products. Angle steel shelves are mostly used to store loose products and lighter products. Medium-sized shelves are mostly used to store boxes and slightly larger items. Manual deposit and withdrawal. The shelves have a simple and strong structure and are mostly used in large, medium and small warehouses, as well as production workshops and storage rooms. Heavy-duty shelves are mostly used to store large quantities of products stored on pallets. They can save high-altitude space, have large storage capacity and good load-bearing performance. The user's requirements for the warehouse racking system should usually include the warehouse floor plan, the specifications, characteristics, and weight of the unit (packaging) goods, the specifications, stacking height and load capacity of the unit pallet goods, and the access method (manual access, mechanical access, automation Access) and access equipment, storage capacity requirements, warehouse entry and exit frequency requirements, management system requirements, control methods, etc.
Contact number: -Mobile: Contact person: Ms. Huang